Soil Infiltration and Drainage

흥신소 Infiltration is the downward movement of water from above ground to the soil. This is a critical process for irrigation, contaminant transport and groundwater recharge.

흥신소

Vegetation can increase infiltration rates by interception and reducing surface compaction. It can also help to reduce erosion levels. Infiltration capacity decreases over time during a rainfall event, this can be attributed to soil moisture depletion and clogging of pores.

What is Infiltration?

Infiltration is the downward movement of water into soil and is part of the overall hydrologic cycle. Infiltration is important for irrigation, contaminant transport and groundwater recharge. Water can be introduced to the soil from rainfall, surface runoff or human activity. Infiltration may occur at the soil surface or in the upper layers of the soil profile depending on the pre-saturation level, morphology of the terrain and soil characteristics. Infiltration occurs more quickly in coarse grained soils such as sands and gravels than fine grained soils such as silts and clays.

The amount of water that can be infiltrated into the soil is called the infiltration capacity. This value can vary greatly. It is usually higher at the beginning of a rain event because the soil is still clean and has a high infiltration capacity, but it decreases rapidly with time as the soil becomes clogged by sediments, swelling clays and other particles.

The infiltration of stormwater is important for reducing the volume of runoff that discharges to surface waters. Many current stormwater management practices encourage maximizing infiltration to reduce stormwater pollutant loading to surface waters.

Rainfall흥신소

Rainfall is water falling from the atmosphere and reaching the ground surface. It is part of the water cycle that replenishes the soil moisture deficiency, some of which is evapotranspired and the rest percolates into the ground to become groundwater.

The water that falls to the ground surface is a mixture of pure and unpurified water and other substances, such as dust particles, organic material, salts, pollutants and other debris. Some of it is redirected by the stemflow system into plant branches and stems where it is absorbed into the leaves, stem and branches. This infiltration is also known as uptake.

After the leaves and branches of a plant absorb the precipitation, some is transferred up through the stem to the roots where it is infiltrated into the groundwater storage zone. The infiltration rate depends on factors such as the initial soil moisture condition, permeability of the soil, the texture and structure of the soil, and the porosity and void space of the soil.

The infiltration process has received a great deal of attention due to its importance for irrigation, contaminant transport, groundwater recharge and ecosystem viability. The quantitative understanding of this important process is critical to linking surface and subsurface processes in describing the hydrologic cycle. It is also an essential factor in assessing irrigation strategies.

Irrigation

Irrigation is the artificial application of water to the soil for supplying moisture needed for plant growth. Irrigation is used for cultivation of crops as the natural source of soil water gets depleted due to evaporation from surface of the ground, transpiration through the plants and deep percolation into the soil. Irrigation is done through various methods like spraying, drip irrigation, sprinklers, etc.

Irrigated water can come from groundwater, springs and wells or surface water such as rivers, lakes or reservoirs, or non-conventional sources such as treated wastewater, desalinated water, drainage water, fog collection, etc. Farmers must protect their agricultural water sources to minimize contamination by pollutants from urban and industrial wastes.

The rate of infiltration depends on several factors such as the puddling of water at the soil surface by raindrop impact, the soil texture and structure, the initial soil moisture content, the filling of available storage pores by previously infiltrated water, the inwash of fine material into soil openings from raindrop impacts, compaction of the soil due to rainfall intensity and duration, evaporation rates and other variables. The Green-Ampt model provides a comprehensive mathematical solution that accounts for these factors and is more accurate than the conventional Darcy’s law approximation.

Drip irrigation is the slow application of water through a pipe or buried below the ground, usually with emitter devices at a distance from the plant to avoid splashing and to reduce evaporation losses. It is cheaper than other surface methods of irrigation but requires regular maintenance and can suffer from weed problem, nutrient loss, water pollution, etc.

Drainage

Drainage is the natural or artificial removal of excess water from a surface to prevent flooding, soil subsidence and the transport of contaminants. Drainage systems are often used to improve horticultural and agricultural properties as well as construction sites, and they can also be installed to avoid the passage of ground moisture into a building in order to protect it from damage.

Water entry into the soil is controlled by a combination of factors, including gravity, capillary forces and adsorption/osmosis. This process is important for irrigation, groundwater recharge and ecosystem viability. The amount, intensity and duration of precipitation influence the rate at which infiltration occurs. When the rate is faster than the infiltration capacity runoff occurs.

Vegetation in the soil increases infiltration and the drainage capacity by reducing compaction, allowing root growth and creating cracks and fissures in the soil. In addition, vegetative cover helps to reduce the intensity of precipitation, leading to less runoff.

Subsurface drainage can be provided by open drains or buried pipe drains. Open drains are shallow ditches that discharge into larger, deeper collector drains. Buried pipe drains are a good alternative to open drains, as they cause no loss of cultivable land and require very little maintenance. However, it is important to note that both methods require a suitable soil with high infiltration rates.